TEFAL Pro Express Plus Anti-scale GV8932 High Pressure Steam Generator Iron

Pro Express Plus Anti-scale GV8932 High Pressure Steam Generator Iron Ultra powerful high pressure steam generator with removable Scale Collector for fast and efficient ironing 

 

• Removable Scale Collector prevents staining and limescale build-up for outstanding ironing results, fast
• Smart Technology provides the optimal balance of heat and steam for every fabric at the touch of a button
• Up to 7 bars of high pressure steam, plus 400g/min steam boost for efficient and outstanding results
• Durilium Airglide Autoclean soleplate for +33% extra glide** for faster ironing, 1.6L removable water tank for easy refilling, plus safety lock and easy cord

**Compared to other Tefal soleplate - External testing 2016

 

Ultra powerful high pressure steam generator with Scale Collector for fast and efficient ironing

Introducing the Pro Express Total GV8932. With up to 7 bars of pressure, plus an ultra-powerful steam boost of up to 400g/min, it’s one of our most powerful high pressure steam generator yet. Designed to cut your ironing time (compared to a standard steam iron), the Pro Express Plus has an integrated boiler which transforms water into high pressure steam to penetrate fabrics deeply. The result: Faster crease removal and more precise ironing. Plus, an ultra-fast heat-up time of two minutes means it’s ready to go in the time it takes you to get the ironing board out!

Removable Scale Collector – the anti-scale solution

Without an anti-scale solution, limescale will build up and clog your iron, reducing its steam output and even discharging onto your garments. Our patented Scale Collector prevents limescale build-up, ensuring your iron’s long-lasting steam power for effortless crease removal. The twist-in spoon captures up to 10 x more particles* directly from the water tank. Simply pull out the spoon and tap the contents in the bin – scale is gone!

Take expert care of your clothing, and achieve outstanding ironing results, with Tefal Pro Express X-pert Care.

* External testing 2016.

Smart Technology - 3 settings for precise ironing

It makes it easy to achieve outstanding ironing results. There are no complicated controls; just three simple settings – ‘Delicate’, ‘Normal’ and ‘Jeans’ – provide the optimal balance of temperature and steam at the touch of a button.

So, how does it work? The Tefal Pro Express Total is fitted with an ultra-precise (<1% variation) electronic regulator. This monitors the soleplate’s temperature and steam output, providing the optimal mix of the two for each fabric. It’s the effortless way to achieve outstanding results across all your ironable fabrics.

  • Unique removable Scale Collector captures up to 10 x more particles* to maintain lasting steam power for effortless crease removal.
  • Easy to use: With Smart Technology, the Pro Express Care has three preset ironing levels, delivering the optimal combination of temperature and steam for all ironable fabrics at the touch of a button.
  • Time saving: Up to 7 bars of high pressure steam, plus powerful 400g/min steam boost, cut through creases in no time – even on the thickest of fabrics.
  • Efficient ironing: The Durilium Airglide Autoclean soleplate has more active holes for even steam distribution, and optimal glide for efficient and effortless ironing. It’s scratch- and stain-resistant too.
  • Uninterrupted use: The extra-large 1.6L removable water tank lets you iron for longer and is refillable as you go – no need to turn off the appliance, so no time is wasted.
  • Safe and convenient: A handy lock system ensures the iron is attached securely to the base so you can transport it safely, while the smart cord wraps around the base for easy storage.

* External testing 2016.

Essentials
  • 3 settings for precise ironing

    There are no complicated controls; just three simple settings – ‘Delicate’, ‘Normal’ and ‘Jeans’ – provide the optimal balance of temperature and steam at the touch of a button.

  • Tefal's Unique and Patented Removable Scale Collector

    Collects up to 10 x more particles* for lasting steam performance and easy crease removal

    * Compared to other tools to capture scale - external test

  • 3 settings for precise ironing

    There are no complicated controls; just three simple settings – ‘Delicate’, ‘Normal’ and ‘Jeans’ – provide the optimal balance of temperature and steam at the touch of a button.

  • Time saving

    Up to 7 bars of pressure cut through creases fast

  • Outstanding results

    Steam shot removes even the most stubborn creases with ease

  • Easy crease removal

    Up to 120g/min continuous steam to ease crease removal

  • High glide for effortless ironing.

    Durilium Airglide Autoclean soleplate gives you enhanced glide** for irrestible and effortless ironing.

     

    ** External testing.

  • Peace of mind

    Auto-off function – so no need to worry whether you turned it off

  • Refill as you go

    The generous 1.6L water tank lets you iron for longer. It’s removable too – so you don’t have to turn off the steam generator then wait for it to reheat. Simply remove the tank mid-session and refill it under the tap.

  • Safe to transport

    The iron locks securely on to the base and may be carried safely by the iron’s handle. So, it’s safe to transport and store while it’s still warm – no need to wait for it to cool down.

  • Easy to store

    The handy power cord rewinder rewinds the cord automatically when you’re done, concealing it inside the base for quick and easy

  • Eco friendly

    To cut energy use by as much as 20% (compared with energy use at maximum output level), simply select the iron’s ‘Eco Mode’. You’ll be saving energy and the environment.

Specifications
Power 2400W  W
Steam output 120  g/min
Steam boost 400  g/min
High pressure boiler    
Steam pressure 7  bar
Water pump 7  bar
Vertical Steam    
Setting of steam & temperature Electronic 3 settings  
Heat up time 2  min
Soleplate Technology Durilium Airglide Autoclean  
Glideability of soleplate *****  
Durability of soleplate / scratch resistance *****  
Precision Tip    
Concentrated Steam boost at tip of soleplate    
Continuous steam diffusion Tip and side  
Comfort Handle    
Stable rest hill    
Water tank capacity 1.6  L
Water tank Removable  
Empty tank detector    
Continuous refilling    
Auto-Off    
Eco Mode    
Power cord length 1.8  m
Cord Storage Power cord and steam cord  
Lock-System    
Anti scale function Rinsing system  
Scale collector    
Scale alert    
Colours White and Blue  
Guarantee 1 YEAR  

Instructions & Manual
Frequent questions
Choose a board that is height-adjustable to adjust it to your body. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
• Tap water:
Your appliance has been designed to work with tap water. If your water is very hard, mix 50% tap water with 50% distilled water (available in stores).
In some regions near the sea, the salt content in your water may be high. In this case, use distilled water only.
• Softener:
There are several types of softeners and most of them can be used in your appliance. However, some softeners, and particularly those that use chemical products such as salt, may cause white or brown stains, this is particularly the case with filter jugs. If you experience this sort of problem, we suggest you try using untreated tap water or bottled water.
Remember:
Do not use rain water or water containing additives (such as starch or perfume) or water from clothes dryers, water from refrigerators, air conditioners etc. These additives may affect the properties of the steam, and together with high temperatures can cause deposits to form in the steam chamber which could soil your laundry and lead to premature ageing of the appliance.
This function allows you to iron fabrics in situ or on a hanger.
To do this, set the iron temperature button to the maximum position.
• Leave the item on a hanger and gently pull the fabric with one hand.
• Press the steam control button intermittently and move the iron from top to bottom.
As the steam produced is very hot, it softens the fibres and removes creases.
Note: Never use the vertical steam function on an item being worn by anyone.
Yes this is because the steam is generated in a separate area away from the soleplate of the iron. This allows you to obtain steam on the lowest heat setting, e.g. silks. However, when the iron temperature control is set to the lowest setting you must also set the steam output control dial (depending on the model) to the low position, otherwise water droplets may appear in the steam.
To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model),
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.),
• Never clean your iron’s soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
Before any maintenance, make sure that the appliance is unplugged and that the soleplate, boiler and iron rest have cooled down (at least 2 hours after ironing).
Do not use any maintenance or descaling product to clean the soleplate or the base unit. Never hold the iron or its base unit under a running tap.
Cleaning the base unit:
• Wipe the plastic parts from time to time using a slightly damp soft cloth.
Maintaining the boiler (once a month):
• Please note: To prolong your boiler's efficiency and avoid scale deposits, you must rinse the boiler every 10 uses (around once a month).
• Check that the generator is cool and has been unplugged for more than 2 hours.
• Slowly loosen the boiler cap. If your generator boiler has an anti-calc rod, take this out and rinse it under the tap before placing it back in the boiler.
• Use a jug to fill the boiler with tap water until it is 3/4 full.
• Shake the base unit gently for a few seconds then empty it completely over the sink.
• For best results, we recommend that you perform this operation once again.
If you live in a hard water area, do this more often. Most of all, do not use any descaling products to clean the boiler as they could damage it.
Descaling operation is not needed for the steam generator, nevertheless, you could rinse the boiler every 10 uses (refer to user manual).
Never use any descaling agent or vinegar when rinsing the boiler: they could damage it.
• Models with scale collector: Rinse the scale collector under water. The next time you use your generator, press the "restart" button to turn off the orange "Anti-calc" light (depending on model).
• Models without scale collector: Rinse the boiler. The next time you use your generator, press the "restart" button to turn off the orange "Anti-calc" light (depending on model).
• The Durillium soleplate:
Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm.
If cleaning dirt off is an issue, use the stick which is made specifically for cleaning the Durillium soleplates.
• The stainless soleplate:
Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.
• The autoclean soleplate:
It is recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.
Warning: The use of iron cleaner will cause damage to your soleplate's autoclean coating.
No. When starting or using the steam generator you may hear a pumping or vibrating noise along with a clicking sound. This is completely normal and is just the pump injecting water into the boiler, or the steam valve opening.
After rinsing the boiler, you need to press and hold the restart button for about 3 seconds to stop the light flashing.
The anti-scale valve plug may be tightened incorrectly or the seal on the inside of the cap has perished.
Yes. However, if you notice that the steam cord is damaged, have it repaired by an authorised service partner.
Place the iron's temperature control to the type of fabric to be ironed and set the steam output to match (If the setting temperature control is on Synthetics, the setting steam control must be on MIN).
It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.
If the boiler does not operate or the red light on the control panel comes on even though there is still water left in the tank, we suggest you check the water tank is not empty. You can also check the removable water tank (depending on model) is pressed down firmly in place and press the restart button located on the control panel. Also the steam output control dial may be set at minimum (depending on Model); therefore turn the dial up to increase the steam.
If your red water light is flashing there is no water in the water tank or the tank is not fully or firmly pushed down.
This can be due to:
• Trying to use steam before the iron is hot enough. Depending on the model of generator, when ironing on a low temperature, decrease the steam output by adjusting the steam output dial on the control panel. Wait for the iron temperature control light to go out before ironing.
• The water may also have condensed in the pipes because you are using steam for the first time or you have not used it for some time. In which case hold the iron away from the ironing board and press the steam control button until it produces steam.
• Over-use of the turbo steam function can cool down the iron soleplate. In this case stop using the turbo steam function and allow the iron temperature control light to come on and go off again before using this function again.
• The boiler may be too full. Do not fill it right to the top.
The generator's safety mechanism has activated. You need to get the generator checked by an authorised service agent.
• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an Approved Service Centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.
• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.
Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.
The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
No. The pressure is at a relatively low level. Your appliance has two safety systems.
• A valve avoids any excess pressure and, in the event of malfunction of the appliance, allows the surplus steam to escape.
• A thermal fuse to avoid any overheating.
A steam generator is the most powerful iron that generates vast amounts of powerful steam in a separate boiler unit and pumps that steam constantly and consistently through the iron's soleplate straight into the clothes. The benefit is that this halves your ironing time and produces fantastic ironing finishes. A steam station is similar to an ordinary iron but has a larger water tank. The water is pumped up to the iron and the steam is generated in the iron not a separate boiler unit. The steam output is constant but not as powerful as a steam generator.
The formation of lime scale is avoided because the water is not in direct contact with the heating element, which is located outside the tank. However, the tank should be rinsed after 10 uses to avoid lime scale deposits.
No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.
The «ECO» function allows you to reduce energy consumption. This means that less electricity is used and therefore slightly less steam is generated.
These functions means that your steam generator is fitted with an electronic regulation which offers you the perfect temperature and steam combination allowing you to iron all your ironable fabrics without risk and without having to sort them.
This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.