Menu
  • English (GB)

TEFAL Tefal Express Compact SV7110 Steam Generator Iron

Tefal Express Compact SV7110 Steam Generator Iron Up to 3 x more steam* for express ironing
  • Up to 5.7 pump bars and 120g/min steam output for faster ironing
  • Ultra-powerful 350g/min steam boost to tackle stubborn creases
  • Anti-scale flush system for easy descaling and lasting performance
  • Xpress Glide soleplate, 1.7L tank, Eco Mode, auto-off and carry lock

Reference: SV7110G0

BUY FROM RETAILERS

BUY FROM TEFAL

Stunning results. Shorter ironing sessions.

Make speedy work of your ironing by upgrading to the Tefal Express Compact SV7110 steam generator iron. Small, but mighty, Express Compact’s maximum 5.7 bar pump pressure produces up to three times more continuous steam* (up to 120g/min) for stunning results in less time. An extra-powerful steam boost gives you of 350g/min steam on demand to tackle tough creases and thicker fabrics, with quick and flawless results. It also has a vertical steam function, making it easy to refresh hanging garments, curtains and other fabric around the home. These steam generator irons will even tell you when it’s time to descale. When the anti-scale button flashes, simply fill the water tank and press the anti-scale button for 3 seconds to flush the scale – no cartridges, no hassle. Our new Xpress Glide ceramic soleplate makes ironing fast and effortless, and there’s no complicated set-up. Simply press to set the temperature according to the fabric you’re ironing. The 1.7L water tank gives you up to 2 hours' ironing time from one fill and is removable to make it easy to top up under the tap. There’s also an Eco Mode setting to cut energy use by up to 20%** without compromising performance and, for peace of mind, Express Compact turns off automatically if left unused for 8 minutes on its heel. The carry lock, cord compartment and compact size make storage easy.

*Compared to a traditional steam iron
**-20% compared with energy use at maximum output level

*Compared to a traditional steam iron

Essentials

  • Express ironing

    Up to 5.7 bar pump pressure for faster ironing

  • Stress-free storage

    Auto-off, carry lock, cord compartment and compact design for safe and easy storage

  • Stunning results

    Up to three times more continuous steam* for stunning results in less time

  • Time saving

    New Xpress Glide ceramic soleplate for fast and effortless ironing

  • Steam on demand

    Up to 350g/min steam boost to smooth stubborn creases and for vertical steaming

  • Non-stop sessions

    1.7L water tank for up to 2 hours’ ironing; removable for easy tap refills

  • Energy saving

    Energy-saving Eco Mode to cut energy use by up to 20%**

  • Repairable for 10 years

    Designed for easy repair at the lowest cost for 10 years; fast delivery of parts to 6500 repair centres worldwide

  • default

    POWERFUL STEAM BOOST FOR STUBBORN CREASES

    Experience the raw power of a 350 g/minute steam boost, to smooth out even the most stubborn creases with total ease.

  • FAST 2-MINUTE HEAT-UP TIME

    With a fast 2-minute heat-up, get your steaming sessions up and running in no time.

‹ ›
Accessories
‹ ›
Specifications
‹
Tefal Express Compact SV7110 Steam Generator Iron
Tefal Express Compact SV7110 Steam Generator Iron
STEAM & POWER PERFORMANCE
Power 2600  W
Steam output 120  g/min
Steam boost 350  g/min
Water pump 5.7  bar
Vertical Steam    
Setting of steam & temperature Manual setting  
Heat up time 2  min
Steam hose length 1.60  m
SOLEPLATE PERFORMANCES
Soleplate Technology Xpress Glide  
Glideability of soleplate ***  
Durability of soleplate / scratch resistance ***  
Continuous steam diffusion Tip and side  
COMFORT IN USE
Comfort Handle    
Auto-Off    
Eco Mode    
Power cord length 1.7  m
Lock-System    
Water tank capacity 1.7  L
Water tank Removable  
Continuous refilling    
Cord Storage Power cord and water cord  
DURABILITY
Anti scale function Anti-scale setting  
Scale alert    
OTHER FEATURES
Colours Blue and white  
Guarantee 2 YEARS  
Instructions & Manual
Frequent questions
Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
This function allows you to iron fabrics in situ or on a hanger.
To do this, set the iron temperature button to the maximum position.
• Leave the item on a hanger and gently pull the fabric with one hand.
• Press the steam control button intermittently and move the iron from top to bottom.
As the steam produced is very hot, it softens the fibres and removes creases.
Note: Never use the vertical steam function on an item being worn by anyone.
To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron's soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.
Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.

• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.

• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.

• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.
It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.
• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.
• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.
Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.
The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.
If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.
The temperature is set too low on your iron, it does not allow you to have steam.
Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.
The self-cleaning operation of the soleplate has to be performed. Refer to the chapter "Maintenance and cleaning", "How to descale my steam generator?".
Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.
No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.
This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Empty my cart
Do you really want to delete all items from cart ?

Confirm

Linen Care
Breakfast
Cooking appliances
Food & Drink Preparation
Cookware
Kitchenware
Pressure Cookers
Multi Cookers
Rice Cookers
Easy Fry
TEFAL BY YOUR SIDE
ACCESSORIES STORE
RECIPES
CONSUMER SERVICES
About Tefal

Consumer ServicesPrivacy PolicyGroupe SebJoin usInventorsSales conditionsLegal termsCookies PolicyLegal mentions

Tefal Web Site

About Tefal

Implantations

alt