TEFAL Maestro FV1834 Steam Iron

Maestro FV1834 Steam Iron
A high-performance, easy-to-use and durable steam iron for effortless ironing, time after time

• Powerful 2400W steam iron with a 110g/min turbo steam boost to remove creases in a flash
• Extra-large, easy-gliding non-stick stainless-steel soleplate for quicker results and effortless ironing
• Anti-drip feature for spotless results and high-capacity, easy-fill water tank for convenience
• No-fuss anti-scale function for easy maintenance and long-lasting performance

Quick and easy ironing, exceptional results

Looking for a quicker and easier way to iron, with exceptional results every time? Tefal Maestro could be the best steam iron for you. This powerful Tefal iron is packed with enhanced features to make ironing effortless. At 2400W, it heats up fast (less waiting around) and steams through creases in no time. A continuous steam output of up to 40g/min relaxes fibres for easier crease removal, while a 110g/min turbo steam boost helps crush stubborn creases in a flash. For convenience, you’ll find the steam boost trigger on the underside of the soft-grip handle. Meanwhile, the easy-gliding, non-stick stainless-steel soleplate makes ironing effortless, while its extra-large size means it covers more fabric in one stroke for quicker results. There’s a clever anti-drip feature to keep your linen spotless – even when ironing at low temperatures – while a high-capacity water tank means you’ll spend more time ironing and less refilling. When it’s time for a top-up, the large filling hole makes it easy to do so and you’ll always know if you have enough water thanks to the visible water level. Finally, a simple anti-scale function makes it easy to keep your Maestro steam iron performing at its best over time.

Essentials
  • Smooth results 

    110g/min steam boost to smooth out tough creases, fast

  • Easy crease removal

    40g/min continuous steam softens fibres to ease crease removal

  • Efficient ironing

    Extra-large, glideable stainless-steel soleplate for effortless ironing and quicker results

  • Quick-access steam

    Ergonomic steam boost trigger at your fingertips

  • Spotless linen

    Clever anti-drip feature to safeguard against water stains while ironing

  • Powerful pressing 

    2400W for fast heat-up and powerful performance

Specifications
Power 2400  W
Continuous steam output 40  g/min
Steam boost 110  g
Vertical Steam    
Spray    
Setting of steam & temperature Automatic steam  
Soleplate Technology Stainless steel  
Glideability of soleplate ***  
Durability of soleplate / scratch resistance ***  
Continuous steam diffusion Tip and side  
Ergonomic steam trigger    
Comfort Handle    
Stable rest hill    
Water filling hole Large  
Anti-drip    
Power cord length 1.95  m
Anti scale function Anti-scale setting  
Colours Dress blue  

Instructions & Manual
Frequent questions

No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).


If your iron has an anti-calc system, you should clean the anti-calc valve once a month. To do this, unplug the iron and leave it to cool for 30-45 minutes. Empty the water and remove the valve, holding it by the top. Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve. the iron does not work without the anti-calc valve.


The electronic system cuts off the electric power and the Auto-Stop warning light flashes if the iron is left vertically on its heel for more than 8 minutes, or in a horizontal position for more than 30 seconds. To restart the iron, just move it gently until the warning light stops flashing. Please note: the auto-stop light will be lit during normal use.

The electronic system cuts the power and the auto-stop light flashes if the iron is not moved for more than 8 minutes (on its heel rest or base) or is left flat for more than 30 seconds. To turn the iron back on, gently shake it until the light goes out.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
Product Reviews