TEFAL Express Anti-Scale SV8012 Steam Generator Iron SV8012G0

The powerful long-lasting steam generator iron

Looking for the best steam generator iron for quick and easy ironing? Consider upgrading to the Tefal Express Anti-Scale SV8012, Tefal’s most powerful steam generator iron yet. Its 6.2 bar pump produces up to 120g/min continuous steam – two times more than a steam iron* – plus an extra 400g/min steam boost to cut through creases even faster. Our new best-in-glide** Durilium Airglide Autoclean soleplate gives you 33% more glide** and more active steam holes for fast and effortless ironing. The Autoclean catalytic coating keeps it stain free and in prime condition over time, too. This is also the first Tefal steam generator iron with patented removable Scale Collector – the ultimate weapon in the fight against limescale. Up to 10 times more efficient*** at capturing scale, this easy descaling solution helps preserve long-lasting steam performance for effortless crease removal. Simply pull it out and rinse it under the tap – scale be gone! Last-minute touch-up to your work shirt? Don’t panic. Express Anti-Scale’s easy vertical steam feature lets you start steaming 30 seconds after you switch it on****. How’s that for speedy steaming? And if all that wasn’t enough, there’s a 1.8L removable water tank for up to 2 hours’ continuous use and fuss-free refills, plus a handy cord compartment for easy storage and a carry lock for safe transportation to and from the cupboard. • Faster ironing: The Express Anti-Scale produces up to two times more continuous steam* to speed up sessions, plus a 400g/min steam boost to tackle tough creases with ease. • Effortless results: The new Durilium Airglide Autoclean soleplate gives you 33% more glide** for fast, effortless ironing and optimal steam diffusion for efficiency. The Autoclean coating keeps it stain free. • Lasting power: Tefal’s first steam generator iron with patented removable Scale Collector. Up to 10 times more efficient at capturing scale***, this ensures lasting steam power and easy crease removal. • Steam on demand: The Express Anti-Scale steam generator iron has an easy vertical steam feature that’s ready to use in 30 seconds**** for speedy steaming – great when you’re in a rush. • Convenient features: It’s got a 1.8L removable water tank for up to 2 hours’ non-stop use and easy tap refills, plus cord compartment for simple storage and easy-carry lock for safe transportation.

***External test 2016

*Compared to a standard steam iron
**External test on coatings; +33% more glide versus previous range
***External test 2016
****In vertical steam position

Essentials

Lasting performance
10 x more efficient Scale Collector*** to maintain lasting steam power for easy crease removal
Faster ironing
6.2 bars producing 120g/min continuous steam* for high-performance results, fast
*Compared to a standard steam iron
Effortless glide
33% more glide** and optimal steam diffusion for fast and effortless ironing
**External test on coatings; +33% more glide versus previous range
Easy crease removal
Powerful 400g/min steam boost to smooth stubborn creases with ease
Easy vertical steam
Ready in 30 seconds****, ideal for last-minute touch-ups
****In vertical steam position
Non-stop sessions
1.8L water tank for up to 2 hours’ ironing; removable for easy refills
Safe and secure
Cord compartment and carry lock for safe and easy transportation and storage
Repairable for 10 years
Designed for easy repair at the lowest cost for 10 years; fast delivery of parts to 6500 repair centres worldwide
Sanitizing steam power
The combination of high temperature and steam pressure kills up to 99.99% of bacteria on all ironable fabrics, for exceptional hygiene and healthier garment care.

‹ ›

Accessories

Removable water tank CS-10000368

Total capacity of 1.8 L

£14.60

Stock available
Steam iron holder CS-10000038

Smart

£5.60

Email me when back in stock.
Removable limescale collector CS-10000036

Ensures long-lasting steam performance

£9.00

Email me when back in stock.
Door hook hanger support CS-00146020

Practical for ironing sessions.

£3.80

Stock available

‹ ›

Specifications

‹	Express Anti-Scale SV8012 Steam Generator Iron
Power	2800
Steam output	120 g/min
Steam boost	400 g/min
Water pump	6.2 bar
Vertical Steam
Setting of steam & temperature	Manual setting
Heat up time	2 min
Soleplate Technology	Durilium Airglide
Glideability of soleplate	*****
Durability of soleplate / scratch resistance	*****
Continuous steam diffusion	Tip, side and heart
Comfort Handle
Auto-Off
Eco Mode
Power cord length	1.6 m
Lock-System
Water tank capacity	1.8 L
Water tank	Removable
Continuous refilling
Cord Storage	Power cord and steam cord
Scale collector
Anti scale function	Removable anti-scale collector
Scale alert
Colours	White and purple
	BUY FROM RETAILERS

Instructions & Manual

Frequent questions

How to better use my product

What type of ironing board should I use?

Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.

What is the vertical steam function used for? How do I use it?

This function allows you to iron fabrics in situ or on a hanger.
To do this, set the iron temperature button to the maximum position.
• Leave the item on a hanger and gently pull the fabric with one hand.
• Press the steam control button intermittently and move the iron from top to bottom.
As the steam produced is very hot, it softens the fibres and removes creases.
Note: Never use the vertical steam function on an item being worn by anyone.

How can I avoid scratching the soleplate of my iron?

To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron's soleplate with abrasive or metallic pads.

How can I avoid shiny marks on fabric?

Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.

Can I have steam for every setting?

The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.

Maintenance and cleaning

How do I clean the soleplate?

• The Durillium soleplate:
Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm.
If cleaning dirt off is an issue, use the stick which is made specifically for cleaning the Durillium soleplates.
• The stainless soleplate:
Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.
• The autoclean soleplate:
It is recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.
Warning: The use of iron cleaner will cause damage to your soleplate's autoclean coating.

How do I maintain my steam generator properly?

Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.

• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.

• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.

• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.

Technical support

Some waterdrops drip out onto the floor during ironing.

It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.

Brown streaks come out of the holes in the soleplate and stain the laundry.

• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.

The soleplate is dirty or brown and may stain clothing.

• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.

The iron doesn't glide very easily.

Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.

A short time after use, I can hear a metallic sound.

The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.

What should I do if my appliance is not working?

After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre

What should I do if the power cable or the cord guard of my appliance is damaged?

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

Should I be concerned about the noise from my steam generator?

No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.

My iron is leaking.

If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.

Why is there no steam from my steam generator?

The temperature is set too low on your iron, it does not allow you to have steam.

Is it normal for my iron to produce a lot of steam and water when the self-cleaning operation of the soleplate has been started?

Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.

My anti-calc light blinks and beeps are emitted regularly, what should I do?

The self-cleaning operation of the soleplate has to be performed. Refer to the chapter "Maintenance and cleaning", "How to descale my steam generator?".

Is it normal for my appliance to vibrate and make noise when the self-cleaning operation of the soleplate has been started?

Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.

Various topics

Is it dangerous to have the water and electricity cables together?

No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.

What is the function of the Autoclean Catalys soleplate (according to model)?

This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.

Where can I dispose of my appliance at the end of its life span?

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

Where can I buy accessories, consumables or spare parts for my appliance?

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

What are the guarantee conditions of my appliance?

Find more detailed information in the Guarantee section of this website.

How to better use my productWhat type of ironing board should I use?Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.What is the vertical steam function used for? How do I use it?This function allows you to iron fabrics in situ or on a hanger.
To do this, set the iron temperature button to the maximum position.
• Leave the item on a hanger and gently pull the fabric with one hand.
• Press the steam control button intermittently and move the iron from top to bottom.
As the steam produced is very hot, it softens the fibres and removes creases.
Note: Never use the vertical steam function on an item being worn by anyone.How can I avoid scratching the soleplate of my iron?To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron's soleplate with abrasive or metallic pads.How can I avoid shiny marks on fabric?Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.Can I have steam for every setting?The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.Maintenance and cleaningHow do I clean the soleplate?• The Durillium soleplate:
Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm.
If cleaning dirt off is an issue, use the stick which is made specifically for cleaning the Durillium soleplates.
• The stainless soleplate:
Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.
• The autoclean soleplate:
It is recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.
Warning: The use of iron cleaner will cause damage to your soleplate's autoclean coating.How do I maintain my steam generator properly?Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.

• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.

• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.

• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.

Technical supportSome waterdrops drip out onto the floor during ironing.It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.Brown streaks come out of the holes in the soleplate and stain the laundry.• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.The soleplate is dirty or brown and may stain clothing.• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.The iron doesn't glide very easily.Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.A short time after use, I can hear a metallic sound.The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.What should I do if my appliance is not working?After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centreWhat should I do if the power cable or the cord guard of my appliance is damaged?Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.Should I be concerned about the noise from my steam generator?No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.My iron is leaking.If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.Why is there no steam from my steam generator?The temperature is set too low on your iron, it does not allow you to have steam.Is it normal for my iron to produce a lot of steam and water when the self-cleaning operation of the soleplate has been started?Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.My anti-calc light blinks and beeps are emitted regularly, what should I do?The self-cleaning operation of the soleplate has to be performed. Refer to the chapter "Maintenance and cleaning", "How to descale my steam generator?".Is it normal for my appliance to vibrate and make noise when the self-cleaning operation of the soleplate has been started?Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.Various topicsIs it dangerous to have the water and electricity cables together?No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.What is the function of the Autoclean Catalys soleplate (according to model)?This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.Where can I dispose of my appliance at the end of its life span?Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.Where can I buy accessories, consumables or spare parts for my appliance?Please go to the “Accessories” section of the website to easily find whatever you need for your product.What are the guarantee conditions of my appliance?Find more detailed information in the Guarantee section of this website.

Express Anti-Scale SV8012 Steam Generator Iron

TEFAL Express Anti-Scale SV8012 Steam Generator Iron

The powerful long-lasting steam generator iron

Lasting performance

Faster ironing

Effortless glide

Easy crease removal

Easy vertical steam

Non-stop sessions

Safe and secure

Repairable for 10 years

Sanitizing steam power