TEFAL AeroSteam, Handheld Steamer, Quick and Easy Single-Stroke Results*
AeroSteam, Handheld Steamer, Quick and Easy Single-Stroke Results*A revolutionary clothes steamer blending steam with suction for iron-like results in one stroke
Exceptional: Iron-like results in one stroke*
Preferred: xx% of users prefer AeroSteam**
Efficient: OptiFlow for single-stroke efficiency
Effortless: Tefal’s easiest handheld steamer
Fast: 50% faster than traditional handheld models***
Achieve iron-like results in a single stroke* with AeroSteam. Tefal’s revolutionary new clothes steamer delivers the power and precision you need to smooth out creases efficiently, for clothes that look freshly ironed. The secret is Tefal’s patented OptiFlow technology. A true innovation in clothes care, OptiFlow combines steam power with suction for iron-like results with just one stroke. This exceptional performance is the reason why xx% of users prefer AeroSteam** over their existing appliance. Tefal’s easiest handheld steamer, AeroSteam is designed for optimal efficiency. Suction holds garments in place as steam smooths away creases, making one-handed steaming effortless. No ironing board, door hook or complicated set-up. One hand and one stroke is all you need to achieve a flawless finish – even over buttons. AeroSteam works 50% faster*** than traditional handheld steamers. OptiFlow suction technology ensures all steam goes to your clothes, not the air. So, you can smooth a shirt in half the time – great when you need to look smart in a hurry. And it’s safe to use on all ironable fabrics: monotemp heated soleplate ensures no risk of overheating. Steam any garment with confidence. Three modes (with noise levels up to 84dBA) provide customised clothes care. Use turbo for maximum suction on tough textiles, soft for synthetics, or steam only to care for your most delicate items. The detachable 100ml tank allows 6 minutes steaming time, ample to smooth your outfit for the day. Plus, this steamer is ready to use in a speedy 30 seconds, turns itself off automatically if left unattended, and is repairable by Tefal for 15 years. * External laboratory test, June 2024 on polyester and cotton in steam + turbo mode compared to Tefal FV57 in 3 dots position ** xx% of users HTC CLAIM TBC *** External laboratory test, June 2024 in steam + turbo mode compared to Tefal DT82 in turbo mode
*External laboratory test, June 2024 on polyester and cotton in steam + turbo mode compared to Tefal FV57 in 3 dots position **xx% of users HTC CLAIM TBC ***External laboratory test, June 2024 in steam + turbo mode compared to Tefal DR82 in turbo mode
Essentials
Iron-like results in one stroke*
Power plus precision for exceptional iron-like results in a single stroke*
Effortless steaming
One hand, one stroke, for effortless steaming.
50% faster steaming***
50% faster than traditional handheld steamers***, saving time with every use.
Energy saving
Garment care that saves energy*** while in use and helps keep your electricity bills low.
Safe for all ironable fabrics
Three modes for customised clothes care, turbo mode, soft suction mode or steam only.
Single-stroke efficiency
Optiflow technology - combining steam plus suction for single-stroke efficiency.
Made in France
Designed and manufactured entirely in France at uncompromising standards of quality and craftsmanship.
Immediate wearability
Clothes are pleasantly dry and ready to wear immediately after steaming thanks to heated soleplate technology that cuts down on condensation.
• Untreated tap water: Your appliance has been designed to use untreated tap water. If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use: Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance: - water from clothes dryers - scented or softened water - water from refrigerators, batteries, air conditioners - rain water - boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
The adjustable suction allows you to choose between 3 modes: Steam (only) for delicate fabrics (silk, nylon, polyester), Steam + gentle suction for synthetic fabrics (acrylic, some cottons) and Steam + turbo suction for maximum suction and fast crease removal on thick cottons, linen or denim.
AeroSteam has been designed for vertical use without support, eliminating the need for an ironing board. As a result, horizontal use is not part of the product design and could lead to water leaks, compromising results.
Yes, the AeroSteam steamer is ideal for all garments, even the most delicate. The single-temperature heating soleplate (140°C) and the 3 modes of use make it suitable for all ironable fabrics.
If the tank is empty, AeroSteam will no longer generate steam. This will not damage the appliance, but you will still be able to iron without steam. So, the ironing performance will be much less satisfactory.
It is recommended to use tap water, as the appliance's internal components are designed to work with hard water. Prolonged use of demineralised water could affect performances.
No maintenance required - no descaling needed. Our hard water endurance tests showed that over a 5-year period there was no scaling leading to a loss of performance. Based on the usage scenario: 6min/session (2 shirts) /5 days/50 weeks i.e. 125h over 5 years.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The water level in the tank is too low ==> Unplug the appliance and fill the tank. The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump. The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product. The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
When first used, white particles may come out of the sole, but this disappears after the second use. These particles come from the product injected inside the boiler to help vaporization. You can find more information about it in the Quick Start Guide.
AeroSteam does not replace an iron, but complements it. In fact, their use is different: an iron is ideal for long sessions when you are ironing a pile of clothes. AeroSteam, on the other hand, is a quick solution for ironing a few items of clothing, when you are in a hurry.
Like all steamers, AeroSteam is equipped with a boiler that transforms water into steam. The big difference with AeroSteam is that it has a motor (which explains the noise) that sucks up the steam and presses the fabric against the heated soleplate. The slider button lets you choose the power of the motor, and therefore the level of suction and noise.
AeroSteam uses Calor's brand new patented Optiflow technology, which combines steam (like all our other steamers) and suction. The suction function ensures that the fabric is pressed firmly against the heated soleplate, making ironing quick, easy and effective.
This is a relatively heavy iron. However, its advanced technology allows it to achieve results that are incomparable with other models. For example, instead of ironing a shirt in 5 minutes, with AeroSteam you can do it in less than 3 minutes, reducing the time you need to use the appliance.
140°C. A resistor at the back of the soleplate transforms water from its liquid state into steam. Thanks to its direct connection to the soleplate, this resistor maintains a temperature of 140°C. This heat is ideal for ironing all types of ironable fabric, whether delicate or thick.
The triangular shape of AeroSteam reproduces the ‘precision tip’ of irons with a ‘snowplough’ effect. When the user slides AeroSteam up and down, the point of the triangle improves ironing efficiency.
Absolutely. AeroSteam is made in France at the Calor factory in Pont-Evêque (38-Isère) using strict quality criteria and exceptional know-how. It also benefits from a commitment to 15 years' repairability at the right price thanks to a network of 6,200 repairers in France, which helps to protect the environment and reduce waste.
Yes, the AeroSteam is designed to be safe and easy to use, with an automatic shut-off function that turns the appliance off after 8 minutes when not in use.
Yes, it stops if it overheats. There is a normative obligation to have thermal fuses and motor fuses. They are used to protect the appliance against sudden overloads and receiver short circuits
Empty my cart
Do you really want to delete all items from cart ?
delivery.information.popup.title
delivery.information.popup.text1
shipping.logistician.extlog
shipping.logistician.saplog
delivery.information.popup.text2
Subscribe to our newsletter
Subscribe to our newsletter and receive 20% off your next order.
Recommended price
This price is the retail price recommended by Tefal to retailers
