Menu
  • English (GB)

TEFAL LIBERTY SV7020 Steam Generator Iron

LIBERTY SV7020 Steam Generator Iron Free yourself with faster and easier ironing*

• Up to 5.4 bars of pressure, 120g/min continuous steam and 290g/min shot for superb results, fast
• XL 1.5L removable water tank for hassle-free sessions; 2 x anti-scale cartridges** for lasting performance
• Rapid two-minute heat-up, smooth-gliding ceramic soleplate and handy vertical steaming feature
• With energy-saving ‘Eco Mode’***, easy-carry lock and auto-off for safety, plus convenient cord storage
*Compared to a traditional steam iron
**Six-month lifespan based on 3 hours of ironing and 1 hour of steam use per week
***-20% compared with energy use at maximum output level

Reference: SV7020G0

BUY FROM RETAILERS

BUY FROM TEFAL

Powerful steam and an XL removable tank for quicker ironing*

Wish your ironing sessions were quicker and easier? Consider upgrading to the Liberty SV7020 steam generator iron – part of the Tefal Liberty range. With more steam power and a bigger water tank*, Liberty SV7020 works faster than a traditional steam iron. Up to 5.4 bars of pressure and a 120g/min continuous steam output produce superb results in no time, while the 290g/min steam boost removes stubborn creases with ease. It’s conveniently compact, yet has an XL 1.5L removable water tank to avoid constant refills and make top-ups easy – just pop it under the tap. The easy-access anti-scale filter cartridge provides hassle-free maintenance and long-lasting performance. Liberty SV7020 comes with one cartridge already set up for you which will last six months** plus another spare one in the box. A fast two-minute heat-up means Liberty SV7020 is ready to go in no time, while its smooth-gliding ceramic soleplate, with active steam holes at the tip and sides, is sure to speed up your ironing. Plus, thanks to its vertical steam feature, you can use Liberty SV7020 as steamer – ideal for last-minute touch-ups and even steaming curtains. It also has a smart ‘Eco Mode’ to cut energy use***, easy-carry lock and auto-off function for safety, plus wrap-around cord for tidy storage.

*Compared to a traditional steam iron

**Six-month lifespan based on 3 hours of ironing and 1 hour of steam use per week

***-20% compared with energy use at maximum output level

*compared to a traditional steam iron

Essentials

  • Powerful performance

    Up to 5.4 bars and 120g/min continuous steam to cut through creases fast

  • Time saving

    Glideable ceramic soleplate for fast and efficient ironing

  • Vertical steam

    Doubles as a steamer – great for last-minute touch-ups

  • Easy crease removal

    290g/min steam boost to remove even the most stubborn creases easily

  • Non-stop sessions

    1.5L removable water tank for uninterrupted ironing sessions.

  • Convenient

    With easy-carry lock, auto-off function and wrap-around cord

  • Fuss-free filtration

    Easy-access, anti-scale cartridge system** for simple maintenance.

    **Six-month lifespan based on 3 hours of ironing and 1 hour of steam use per week

  • Ready when you are

    Fast heat-up time – up and running in just two minutes

  • Space saving

    Compact design, ideal where space is limited

  • Energy saving

    ‘Eco Mode’ cuts energy use by up to 20%***
    ***-20% compared with energy use at maximum output level

‹ ›
Accessories
‹ ›
Specifications
‹
LIBERTY SV7020 Steam Generator Iron
LIBERTY SV7020 Steam Generator Iron
STEAM & POWER PERFORMANCE
Power 2200  
Steam output 120  g/min
Steam boost 290  g/min
Water pump 5.4  bar
Vertical Steam    
Setting of steam & temperature Manual setting  
Heat up time 2  min
SOLEPLATE PERFORMANCES
Soleplate Technology Ceramic  
Glideability of soleplate ***  
Durability of soleplate / scratch resistance ***  
Continuous steam diffusion Tip and side  
COMFORT IN USE
Comfort Handle    
Anti-drip No  
Auto-Off    
Eco Mode    
Power cord length 1.6  m
Lock-System    
Water tank capacity 1.5  L
Water tank Removable  
Continuous refilling    
Cord Storage Steam cord  
DURABILITY
Anti scale function Cartridge  
Scale alert    
Instructions & Manual
Frequent questions
Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
This function allows you to iron fabrics in situ or on a hanger.
To do this, set the iron temperature button to the maximum position.
• Leave the item on a hanger and gently pull the fabric with one hand.
• Press the steam control button intermittently and move the iron from top to bottom.
As the steam produced is very hot, it softens the fibres and removes creases.
Note: Never use the vertical steam function on an item being worn by anyone.
To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron's soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.
The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.
• The Durillium soleplate:
Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm.
If cleaning dirt off is an issue, use the stick which is made specifically for cleaning the Durillium soleplates.

• The stainless soleplate:
Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.

• The autoclean soleplate:
It is recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.
Warning: The use of iron cleaner will cause damage to your soleplate's autoclean coating.
Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.

• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.

• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.

• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.
It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.
• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.
• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.
Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.
The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.
If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.
The temperature is set too low on your iron, it does not allow you to have steam.
Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.
The self-cleaning operation of the soleplate has to be performed. Refer to the chapter "Maintenance and cleaning", "How to descale my steam generator?".
Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.
Yes, the replacement cartridge may be different from your original cartridge, especially in its connection to the tank. This has no consequence on the operation of your steam generator, the 2 types of cartridge are interchangeable.
No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.
This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Items recently viewed
‹ ›
Empty my cart
Do you really want to delete all items from cart ?

Confirm

Linen Care
Breakfast
Cooking appliances
Food & Drink Preparation
Cookware
Kitchenware
Pressure Cookers
Multi Cookers
Rice Cookers
Easy Fry
Vacuum Cleaners
TEFAL BY YOUR SIDE
ACCESSORIES STORE
RECIPES
CONSUMER SERVICES
About Tefal

Consumer ServicesPrivacy PolicyGroupe SebJoin usInventorsSales conditionsLegal termsCookies PolicyLegal mentions

Tefal Web Site

About Tefal

Implantations

alt