TEFAL Comfort Glide FV2650 Steam Iron

Comfort Glide FV2650 Steam Iron
Ultra powerful, a fast glide by Tefal

A fast and efficient iron

Comfort Glide is easy to use and super efficient : excellent glide, superior convenience and efficiency while simplifying the task.

Comfort Glide is fast and efficient

The Durilium technology has 3 key benefits. It has our best glideability for fast and easy ironing. It provides maximum steam distribution thanks to the active steam holes at the tip, the side and, contrary to most competitors, at the center of the soleplate. It is very resistant to scratches as it is 2 tilmes thicker than regular ceramic and is cooked at more than 500°C which ensures its durability. All Durilium soleplates are engineered, tested and made in France with the highest quality standards.
  • Durilium Technology with active steam holes for maximum steam distribution

    The Durilium technology provides maximum steam distribution thanks to the active steam holes at the tip, the side and, contrary to most competitors at the center of the soleplate

  • Continuous steam ouput to ease crease removal

    Continuous steam output of up to 35 g/min gives you the ideal constant amount of steam to remove creases with ease.

  • Steam boost to remove even the toughest creases

    The steam boost is concentrated at the soleplate tip for more efficiency. The steam deeply penetrates the fabrics to ease your ironing and remove difficult creases.

  • Ergonomic steam trigger

    So easy to trigger, the shot of steam is at your fingertip. It is convenient and comfortable.

  • Anti-drip to keep the linen spotless

    The anti-drip function prevents water from dripping and staining your linen while ironing.

  • Maximum steam distribution for efficient ironing

    The active steam holes at the tip, the side and, contrary to most competitors, at the center of the soleplate allow a maximum steam distribution.

  • Durilium® Technology Soleplate for Outstanding glide

    All soleplates are not the same. The Durilium technology invented by Tefal has been used by millions of consumers all over the world.
    For over 30 years, our soleplate has been acclaimed for its outstanding glide which provides fast and effortless ironing and for its excellent scratch resistance even when ironing harmful areas such as zippers.

Power 2300  W
Continuous steam output 35  g/min
Steam boost 120  g/min
Vertical Steam    
Setting of steam & temperature Automatic steam  
Soleplate Technology Durilium Technology  
Glideability of soleplate ****  
Durability of soleplate / scratch resistance *****  
Precision Tip    
Continuous steam diffusion Tip, side and heart  
Ergonomic steam trigger    
Comfort Handle    
Stable rest hill    
Water tank capacity 270  ml
Water filling hole Extra Large  
Power cord length 2  m
Anti scale function Anti-scale setting  
Colours Petrol Blue  
Guarantee 1 YEAR  

Frequent questions

No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).

If your iron has an anti-calc system, you should clean the anti-calc valve once a month. To do this, unplug the iron and leave it to cool for 30-45 minutes. Empty the water and remove the valve, holding it by the top. Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve. the iron does not work without the anti-calc valve.

The electronic system cuts off the electric power and the Auto-Stop warning light flashes if the iron is left vertically on its heel for more than 8 minutes, or in a horizontal position for more than 30 seconds. To restart the iron, just move it gently until the warning light stops flashing. Please note: the auto-stop light will be lit during normal use.

The electronic system cuts the power and the auto-stop light flashes if the iron is not moved for more than 8 minutes (on its heel rest or base) or is left flat for more than 30 seconds. To turn the iron back on, gently shake it until the light goes out.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
Product Reviews