Freemove Air Cordless FV6520 Steam IronThe lightest cordless iron by Tefal, designed to make light work of your ironing sessions
Tired of the cord getting in your way? Looking for a simpler way to iron? Introducing Freemove Air: lightest cordless Tefal steam iron, designed to make light work of your ironing sessions. With up to 25g/min continuous steam output and a 115g/min steam boost, this Tefal iron powers through even stubborn creases with ease. The super-smooth ceramic soleplate glides effortlessly over your clothes, while the 250ml water tank lets you iron for longer without having to stop and refill. This iron recharges rapidly and has an anti-drip feature to keep your fabrics spotless. There’s even an anti-scale function to prevent limescale build-up and maintain your iron’s performance.
Go cordless for comfortable and effortless ironing sessions
Enjoy complete freedom of movement and stress-free ironing sessions with Freemove Air: the lightest cordless iron by Tefal. It’s completely cable free, so you’ll never have to worry about the cord getting in the way or creasing what you’ve already ironed. Ultra-manoeuvrable, its super-smooth ceramic soleplate glides effortlessly over garments, making ironing a breeze. Even the base is designed for ease: because it’s horizontal, it matches your natural movement as you iron. Simply slide the iron into place in one smooth motion – no lifting required. What’s more, every time you set Freemove Air back on the base, it recharges rapidly. In fact, in the short time it takes to adjust the position of your clothing, your iron will be charged and ready to go! There’s also a handy smart light on the base to tell you when it’s time for a top up, so you won’t run out of power mid-session.
Cordless and lightweight: Freemove Air provides complete freedom of movement, gliding effortlessly over garments for quick, easy and comfortable ironing sessions.
Ergonomic base: The iron slides onto the horizontal base in one smooth motion, ensuring comfort and safety in use. The base attaches easily to your ironing board for stability when ironing.
Quick recharge: Freemove Air recharges rapidly every time it’s set on the base, so it’s always ready to use. A smart light on the base shows when it’s time to recharge.
No stain risk: The clever anti-drip function safeguards against staining to keep your fabrics spotless.
Durable results: The anti-scale system prevents limescale build-up to maintain long-lasting steam performance, ensuring you achieve effortless crease-free results, time and time again.
Auto-off: For added safety and peace of mind, Freemove Air turns off automatically if left unattended or on its base for longer than 8 minutes. To restart, just remove the iron from the base then replace it.
Cordless technology for greater agility and freedom of movement
There’s nothing more frustrating than an iron cord that isn’t long enough to reach the end of the board or that gets in the way. So, we’ve got rid of it to give you complete freedom of movement. Our lightest cordless iron, Freemove Air is designed for comfort and ease. With no cord to hold you back, you’ll glide through your laundry pile without getting tangled up or creasing areas that you’ve already ironed.
Freemove Air’s built-in anti-drip feature prevents water from dripping and staining your clothes during ironing. So, your freshly-washed clothes stay spotlessly clean.
Stay in the know
Handy smart light on the base lets you know when it’s time to recharge
Each time you set Freemove Air back on its base to reposition your clothes, it will recharge in just 11 seconds, giving you 25 seconds of working time. So, you can be sure it will always be at full power when you need it. A built-in smart light tells you exactly when you need to recharge, so you never run out of power mid-session.
Ergonomic base - no lifting required
Freemove Air has an ergonomic base that’s horizontal to match your natural movement as you iron for effortless ironing sessions. Whenever you want to return Freemove Air to its base, simply slide it into place in one smooth motion. There’s no lifting required for ironing sessions that are comfortable, easy and safe.
No cord for complete freedom of movement
Comfort in use
Agile and ultra-manoeuvrable, the lightweight Freemove Air cordless iron makes ironing quick, easy and hassle free.
Peace of mind
If left unattended on its base for more than 8 minutes, Freemove Air turns off automatically. To restart, simply remove it from the base then replace it to charge.
There could be several reasons for this: • You are not using the right type of water (Refer to the FAQ "What water should I use for ironing?"). • You have used a starch type product on your laundry (Always spray to the reverse side of the fabric to be ironed and clean your iron afterwards). • Fibers from clothes have been trapped in the holes in the iron and have become carbonised. • The clothes have not been rinsed enough and there is detergent left on them or you have ironed a new item of clothing before washing it. • See the instructions for use to find out what type of water is appropriate and clean the soleplate from time to time with a damp sponge.
It is essential to select the right ironing temperature. Your iron has a built-in thermostat controlling the temperature very precisely over the entire surface of the soleplate. The thermostat dial contains international markers with dots corresponding to three ironing temperatures. Make sure that you use the right temperature for your clothes: • Marker with 1 dot for synthetic fabrics. • Marker with 2 dots for wool and silk. • Marker with 3 dots for cotton and linen.
• Don't use the Boost steam button intensively. Wait few seconds between each use. • The temperature button must be placed on Steam area (between 2 dots and MAX). • Use steam only when the iron is hot (the light must be off).
Yes and you do not need to fill the tank with water. Set the variable steam control to Dry and set the temperature to suit the type of material (care points •, ••, •••). At the end of your ironing session, we would suggest that once your iron has cooled down, you should wipe over the soleplate and around the steam holes to remove any burned fibers that may have started collecting around the steam holes.
No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).
Your appliance has been designed to work with tap water. If your water is very hard, mix 50% tap water with 50% distilled water (available in stores). Do not use rainwater or water containing additives (starch, perfume, aromatic substances, softeners, etc.) or water obtained through condensation (e.g. dryer, refrigerators, air conditioners or rainwater). These contain organic waste as well as minerals that condense under the influence of heat and cause sputtering, brown stains or the premature wear of your appliance.
If your iron has an anti-calc system, you should clean the anti-calc valve once a month. To do this, unplug the iron and leave it to cool for 30-45 minutes. Empty the water and remove the valve, holding it by the top. Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve. the iron does not work without the anti-calc valve.
Firstly, fill the iron tank to MAX with water. Set the thermostat control to Max and the steam control on DRY and switch on. Place the iron on its heel and leave to heat up for around 5 minutes. Unplug the iron then hold your iron horizontally above the sink. Remove the anti-scale valve (or set the control to self-clean/autoclean depending on the model). Steam, water and scale deposits will leave the steam chamber through the steam holes and the iron will be clean. At the end of the operation, push the anti-calc valve back into position. When your iron is cold, you will also be able to use your vacuum to gently suction limescale and dirt that may have clogged the holes in the soleplate.
Four good tips: After use, empty the tank, close the steam control, set the thermostat to minimum and stand the iron upright or place it on the base (depending on model). Cleaning: Use a damp soft cloth to wipe your iron and never use cleaners or solvents. If your iron has an auto-clean function, refer to the instruction manual before using it. Tips: • Always use untreated water in your iron. If your water is very hard, we recommend you use a mix of 50% untreated tap water and 50% distilled water. • Avoid placing your iron on sharp objects such as zip fasteners and metal buttons. • Do not put your iron down flat on rough surfaces.
You must take precautions so that using your iron is risk-free. Of capital importance… Never leave a hot iron unattended. This is not only to avoid overheating of the iron or the surface on which it is placed but also to ensure that no-one gets burned. If safety is one of your main concerns, choose an iron that has an automatic cut-off function. And never, never… Never leave a hot iron within reach of children or pets who risk knocking it over and injuring themselves. Like any electrical appliance, never put your iron in water. Do not use an iron that has fallen down or has a damaged power cord. If you have the slightest doubt concerning the condition of your iron, contact the Service Centre. Always unplug your iron before leaving it, cleaning it or filling it with water (unless it is a model that has a removable water tank). Regularly check the water level to ensure that there is always enough.
Never use any descaling agent or vinegar when rinsing the boiler: they could damage it. • Self-cleaning: heat the iron, unplug it, remove the anti-calc valve and spray the iron over the sink. • Cleaning the anti-calc valve: Remove the antiscale valve and soak the valve in a cup of white vinegar or plain lemon juice for 4 hours.
It is not designed for the water to be removed completely. It is okay to use or store the iron even with a small amount of water remaining. When storing, please remove as much water as possible and store in an upright position.
3 possible causes: • No mains supply: check that the mains plug is properly inserted or try plugging the iron into a different socket. • Temperature control set too low: set the temperature control to a higher temperature. • The automatic electronic cut-out* is active: move your iron. * depending on model
Please be advised that when filling up your iron with water you should have all settings on a “no steam” setting. Ensure the iron is unplugged. Fill the iron up, plug in, switch on, then turn the dials to the settings required ensuring that the iron is set to a temperature where steam will be produced. This will ensure that the steam valve within the water tank remains closed and will prevent any water from leaking out of the water tank when water is added.
The electronic system cuts off the electric power and the Auto-Stop warning light flashes if the iron is left vertically on its heel for more than 8 minutes, or in a horizontal position for more than 30 seconds. To restart the iron, just move it gently until the warning light stops flashing. Please note: the auto-stop light will be lit during normal use.
Some irons (depending on model) can produce steam when set on the One dot setting, however, the majority of our irons will only produce steam when set on the 2 dot or 3 dot setting. When you look on your iron's thermostat dial you will notice that the 2 dot and 3 dot settings have a shaded background, this indicates that the iron will produce steam when the dial is set inside this shaded area.
All irons contain a thermostat light. It is normal for the thermostat to turn on and off. It indicates the thermostat is working and your soleplate is being maintained at the desired temperature. If the auto-off light blinks, you must disengage the auto-off function. This is done by gently shaking the iron which will allow the iron to reheat.
When heating your iron for the first time, you may notice a small amount of odour and smoke, this is simply the engineering residues from the manufacturing process burning off. These are harmless and will quickly disappear.
Your iron has been stored horizontally, without emptying the water tank and with the selector placed on steam position. When you store your iron horizontally, check that the tank is empty and the steam selector is set to "DRY" position.
Check the following points: • The tank is empty or almost empty; add more water, • The selected temperature is too low and does not allow steam to be produced; set the thermostat to the steam zone (between 2 dots and MAX), • If your iron has a Dry/Steam control, set it to the Steam position, • Scale has built up in your iron; descale it, • Your iron has an intelligent system (a moving sensor) which temporarily stops steam being released when the iron is not moving, even when it is placed horizontally. This function eliminates wasted steam while you are handling the clothes!
Please check the following points: • The tank is empty or almost empty; add more water. • The selected temperature is too low to use this function; set the thermostat to the zone between 3 dots and MAX. The "supersteam" or "turbo" function should not be used intensively – wait a few seconds between pressing the button.
This is probably crystallized calcium chlorohypochlorite. Carry out the self-cleaning instructions in the instruction manual two or three times. If that hasn't resolved the problem, it may be that your iron needs repair. Please contact the service centre.
This may be due to the use of chemical descaling agents or additives in the water for ironing. Never use this type of product in the water tank (see our recommendations regarding water to be used). Some residues could also been present in the steam chamber or on the soleplate; use the self cleaning function (Depending model). All linen, especially new garments, must be washed and rinsed thoroughly to remove any soap and chemical deposits before you iron them. If these are not removed by washing they may appear later out of the soleplate in the form of small brown or white spots or streaks on your linen.
Use the right temperatures on the thermostat for the right fabrics. A reason for sticking may be the use of starch. If you want to use starch, simply spray it on the reverse side of the garment, so that there is no contact between the soleplate and the starch. Clean the soleplate from rubber prints of fabric (Which always must be ironed on reverse side of the rubber prints).
The electronic system cuts the power and the auto-stop light flashes if the iron is not moved for more than 8 minutes (on its heel rest or base) or is left flat for more than 30 seconds. To turn the iron back on, gently shake it until the light goes out.