• Untreated tap water: Your appliance has been designed to use untreated tap water. If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use: Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance: - water from clothes dryers - scented or softened water - water from refrigerators, batteries, air conditioners - rain water - boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
AeroSteam has been designed for vertical use without support, eliminating the need for an ironing board. As a result, horizontal use is not part of the product design and could lead to water leaks, compromising results.
Yes, the AeroSteam steamer is ideal for all garments, even the most delicate. The single-temperature heating soleplate (140°C) and the 3 modes of use make it suitable for all ironable fabrics.
If the tank is empty, AeroSteam will no longer generate steam. This will not damage the appliance, but you will still be able to iron without steam. So, the ironing performance will be much less satisfactory.
It is recommended to use tap water, as the appliance's internal components are designed to work with hard water. Prolonged use of demineralised water could affect performances.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The water level in the tank is too low ==> Unplug the appliance and fill the tank. The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump. The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product. The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
AeroSteam does not replace an iron, but complements it. In fact, their use is different: an iron is ideal for long sessions when you are ironing a pile of clothes. AeroSteam, on the other hand, is a quick solution for ironing a few items of clothing, when you are in a hurry.
This is a relatively heavy iron. However, its advanced technology allows it to achieve results that are incomparable with other models. For example, instead of ironing a shirt in 5 minutes, with AeroSteam you can do it in less than 3 minutes, reducing the time you need to use the appliance.
