TEFAL TEFAL X-Clean 4, Cordless Hard Floor washer, Wet Dry Vacuum Cleaner, Timesaving 2-in-1 Washing and Vacuuming
TEFAL X-Clean 4, Cordless Hard Floor washer, Wet Dry Vacuum Cleaner, Timesaving 2-in-1 Washing and VacuumingVacuum & wash 2x faster* and longer
With 2-in-1 deep-cleaning action for perfect results in half the time, X-Clean 4 by Tefal is the home cleaning solution for a spotless home made effortless. This timesaving wet dry cordless vacuum comes equipped with cutting-edge technology and features for an improved cleaning experience: Smart dirt detection and auto power adjustment, an extra-long running time up to 50 minutes* with a single charge, self-propelled cleaning and so much more.
*50 mins in ECO mode. Runtime in Max mode is 30 mins.
The cordless vacuum offering the perfect combination of performance and running time
X-Clean 4 offers full cleaning in half the time with exceptional 2-in-1 vacuuming and washing in a single pass. Discover a wet dry cordless vacuum cleaner offering powerful and thorough cleaning that leaves your home spotless—removing all types of mess and ground-in dirt whether solid or liquid, large or microscopic. All this, with an extra-long running time up to 50 minutes—to cover your entire living space (up to 350 m²) with a single charge.*
*Faster than cordless handsticks and traditional mop
*depending on home furnishings
Essentials
2-in-1 cleaning
Save time with a 2-in-1 solution that vacuums and washes in a single pass for perfect results on all types of hard floors—hardwood, tile and more.
Smart dirt detection
Automatic detection of dirt and debris, with color display and immediate adjustment of roller rotation speed/water flow for perfect cleaning results.
Extra-long running time
Cordless cleaning that goes the distance, with up to 50 minutes of running time to cover up to 350 m² of surface.*
*depending on home furnishings
Effortless cleaning
A self-propelled roller system for cleaning that requires just 25% of the effort, together with slick ergonomics and a well-crafted modern design.
Self-cleaning system
Activate the self-cleaning feature with the single push of a button, wash your roller and leave it to dry so it's ready to go when you need it.
Edge-cleaning side brush
The built-in side brush offers effortless cleaning of edges and corners—for a spotless home, even in the hardest-to-reach areas.
Constant clean system
Clean water flows constantly into the brush roller for pristine cleaning results while dirty water is sucked back into a second isolated tank.
Excellent compatibility
Compatible with all major household detergents for a boost of deep-cleaning efficiency.
There is no need to vacuum, the X-Clean can vacuum and wash solid and liquid waste. If there is a large amount of dry debris on the floor, you can vacuum first to avoid filling the tank of the X-Clean too quickly.
The X-Clean washer can be used on all types of smooth floors: waxed concrete, tiles, terracotta, PVC, linoleum, parquet.
For parquet or more delicate floors, don't hesitate to use modes with a low water flow to avoid soaking them.
We recommend testing the appliance on a small area for delicate floors when using it for the first time.
Refer to product safety and use instructions. Do not use on carpets, walls, windows or floors sensitive to water. Product is not designed for outdoor use.
No, it doesn’t : it is specially designed to clean your hard floors without causing any damage. However, we recommend testing the device on a delicate area during the first use.
We do not recommend using the X-Clean washer on carpets. Even though they can pick up dirt, washers wet fabrics, which can leave marks or promote bacterial growth.
The recommended use for our washer remains hard floors.
Even if the washer is compatible with most household cleaners on the market, this remain optionnal. You are responsible for this; please follow these instructions:
Prefer multi-surface detergents suitable for various types of floors. Use solutions with mild surfactants.
Do not use products containing bleach, pure bleach, or corrosive agents. Do not use foaming cleaning products (carpet shampoo, black soap, dishwashing liquid).
Do not use acid-based cleaners, such as certain bathroom products. These are too harsh and may corrode the vacuum mop’s metal components. Do not use greasy (e.g., black soap), toxic, flammable, aggressive, or particle-containing products.
Adding household detergents to the water tank is done at your own risk. Using incompatible detergents may damage and cause your device to malfunction. This could cause a product dysfunction.
When using detergents, always follow the dosage recommended by the manufacturer to avoid residue on the floor and to ensure quick drying. Overdosing the detergent may damage your device and cause it to malfunction.
The X-Clean washing vacuum cleaner automatically recharges when you put it back on its base, which must be plugged in. Once fully charged, the appliance will turn off automatically, there is no need to unplug your base.
As with a traditional mop, an ingrained stain will take longer to remove than a superficial stain. Our recommendation: Use the ‘MAX’ mode on your washer. Let the roller run over the stain for a few moments to moisten it thoroughly, then go over it again several times to get rid of the stain.
After each self-cleaning cycle, it is important to empty both of your appliance's tanks. However, it is not necessary to wash the roller and the rest of the appliance. For this step, we recommend (depending on your frequency of use and type of dirt vacuumed) that you wash your roller once a week.
Brush wear depends mainly on the surface of the floor. If your home is covered only with tiles, the brushes will last longer than those used on rougher surfaces such as terracotta or concrete. In all cases, you'll notice with the naked eye when the bristles on your brush start to get damaged. The average recommendation is to change your roller every 6 months.
No, the roller is not compatible with the washing machine, which could damage it and then damage your appliance. If your roller is dirty, and you want to wash it more thoroughly, we recommend that you wash it under the tap with washing-up liquid, and then rinse it thoroughly to remove any residue.
If the clean water tank is empty, refill it. The water distribution system may be clogged. In this case, clean the nozzles using the supplied cleaning brush and/or a damp cloth. If this is not sufficient, fill the clean water tank with cold household white vinegar and run a Self-Clean (self-cleaning) cycle. If the water flow is too low, make sure you are using the appropriate suction mode (depending on the model).
Always use the device with the roller in place and the clean water tank full. If a foreign object is stuck in the cleaning head, clean it. Check that the washing head is not damaged.
An object or fibres may be blocking the roller. If so, dismantle your roller and remove any items that are preventing it from rotating. Also check between the roller and the side brush if there is one.
The roller may be dirty. If this is the case, run a self-cleaning cycle and then clean the roller by hand.
If the problem persists, the appliance may not be set to the correct cleaning mode.
Adjust the operating mode according to the level of dirt on your floor. A stubborn stain will take longer to clean than a superficial stain.
We therefore recommend using the ‘MAX’ mode on the vacuum cleaner and letting the roller run over the stain for a few moments to moisten it thoroughly, then going over it several times to remove the stain.
If the water flow is too high or the roller is soaked, set the appliance to minimum water flow. If there is a water leak from the vacuum cleaner, contact an authorised repairer, who will be able to help you resolve the issue.
The presence of foam in the dirty water tank can cause incorrect detection and make the system think the tank is full. Rinse and clean the dirty water tank, without using foaming detergent. Do not forget to fill the clean water tank.
To start, your device must be in the running position: tilt the vacuum cleaner and press the ON/OFF button. Parking mode will stop the device and you will not be able to restart it in this position. If the vacuum cleaner is broken, please contact our authorised repairers who will be able to help you.
